References – White Papers​

White Paper on Single Pair Ethernet

Single Pair Ethernet Association & ASERCOM

From Modbus RTU to SPE – The Future of Communication in Refrigeration, Air Conditioning, and Heat Pump Technology

Modbus RTU over RS-485 has been an established communication standard in the refrigeration, air conditioning, and heat pump (RACHP) industry for decades. However, growing demands for digitalization, energy efficiency, data availability, and cybersecurity are presenting the industry with new challenges. Single Pair Ethernet (SPE) offers a powerful, secure, and future-proof alternative.

The white paper, developed jointly by the Single Pair Ethernet Association and ASERCOM, demonstrates how SPE can advance communication in refrigeration systems, air conditioning systems, and heat pumps (HVAC/RACHP). With end-to-end Ethernet/IP communication down to the field level, higher data rates, and the optional transmission of data and power over a single wire pair via Power over Data Line (PoDL), SPE opens up new possibilities for intelligent, networked systems.

The white paper highlights the technological advantages of SPE over Modbus RTU, cybersecurity requirements in the context of the EU Cyber Resilience Act (CRA), and the challenges of a phased migration. Relevant standards, practical application tests, and specific use cases complement the technical analysis.

Learn how SPE can pave the way for more efficient, secure, and seamlessly connected refrigeration, air conditioning, and heat pump technology.

Single Pair Ethernet System Alliance

Single-Pair Ethernet (SPE) for Humanoid In-Robot Networks

Humanoid robots combine numerous sensors, powerful actuators and AI-based real-time control within an extremely confined space. This creates demanding requirements for bandwidth, deterministic communication, reliability, and lightweight, space-saving cabling.

This whitepaper explores how Single Pair Ethernet can reduce the complexity of internal robot networks by providing a unified communication infrastructure. Over a single twisted pair, SPE enables scalable data rates, TSN-based real-time communication and optional Power over Data Line for low-power sensors and controllers.

Discover why SPE can become the high-performance “nervous system” of future humanoid robots – compact, robust and ready for software-defined robotic platforms.

Single Pair Ethernet System Alliance

Single Pair Ethernet: The Future of System Architecture in Automation

Traditional automation networks are characterized by a variety of fieldbuses, complex cabling, and limited scalability. This fragmentation not only complicates integration and maintenance but also poses significant security risks. Single Pair Ethernet (SPE) is revolutionizing system architecture by enabling seamless, end-to-end communication from the field level to IT infrastructure.

Discover in our whitepaper how SPE optimizes communication, eliminates existing bottlenecks, and lays the foundation for secure, scalable, and future-proof industrial networking.

Weidmüller

Single Pair Ethernet (SPE) for Device Manufacturers

The whitepaper explores the transformative potential of Single Pair Ethernet (SPE) for device manufacturers. By enabling Ethernet communication over a single twisted pair, SPE facilitates high-speed data transmission and simultaneous power supply over long distances—making it ideal for industrial automation, robotics, building automation, and the energy sector.

Key benefits include an optimized network architecture, simplified installation, and minimized interference. SPE leverages compact, robust connectors, a standardized physical layer, and reliable transceiver technology, with a strong focus on efficient power management and electromagnetic compatibility.

As SPE standards continue to evolve, this technology is set to become a key enabler of smart, connected infrastructures—compact, cost-efficient, and sustainable.

CAPIEL

Networking opportunities with Single Pair Ethernet for CAPIEL manufacturers

Switchgear, controlgear and their assemblies are getting smarter thanks to more powerful embedded electronics. The emerging Single Pair Ethernet (SPE) technology enables these network components to interact with the control systems into which they are integrated. This presentation analyses the potential transformation of industrial communication networks from traditional fieldbus to SPE, as well as the associated challenges and benefits on the market.

The major business trend is the development of industrial internet of things using digital twin information models for increasing the effectiveness of the manufacturing and electrical distribution systems where the increased connectivity and interoperability of switchgear and controlgear plays a significant role, including the flexibility to adapt information exchanges in systems more rapidly. Challenges such as the carbon footprint reduction required by EU regulations and the required new skills should be managed.

Belimo, Thermokon und WAGO

Utilizing Single Pair Ethernet in Building Automation

Single Pair Ethernet (SPE) is designed to replace classic serial field installation based on RS-485 or proprietary technology. Two wires, i.e., one wire pair, will be sufficient for seamless connection in the future, from the field device (sensor/actuator) to the cloud and back, using proven IP-based communication protocols, such as BACnet/IP and BACnet/SC, Modbus/TCP or KNX/IP. The advantages are obvious: Seamless communication eliminates gateways; a single wire pair saves weight, space and installation time. With Power over Data Line (PoDL), SPE also offers the option of powering communication devices via the same wire pair.

But what is the right IEC 802.3 profile to make use of it in building automation applications? The companies Belimo, Thermokon and WAGO use this positioning paper to move a step forward and to come to a conclusion.

Texas Instruments

How to Implement an IEEE 802.3cg or 802.3bu-Compliant PoDL PSE

With SPE also PoDL often comes along, this whitepaper explains the requirements and implementation of the Power Sourcing Equipment (PSE)

Texas Instruments

IEEE 802.3cg 10BASE-T1L Power over Data Lines Powered Device Design

In this application note you can read how a PoDL Powered Device (PD) can be implemented.

Texas Instruments

How an Why to Use Single Twisted-Pair Ethernet (SPE)

Communication in robotics system designs is undergoing a transformation as it keeps pace with the fourth industrial revolution, or industry 4.0. In the status quo, robot communications must be robust, accurate, have excellent timing characteristics and neither hinder axis movement, nor be negatively impacted by it. Several important, but disparate, communication interfaces have evolved to meet the stringent requirements of robotics communications and have done so for many years. Increasing speed and bandwidth requirements from robots is starting to exceed the capabilities of these very effective interfaces. This application note shows what to consider when designing with Single Twisted Pair Ethernet to ensure it fits your system requirements.

Draka (Prysmian Group)

Single Pair Ethernet (SPE) in IIoT and BIoT Environments – a Backwards Compatibility Study

What should we do regarding preparations for the employment of Single Pair Ethernet? Can we benefit from Single Pair Ethernet networks right now? Is it possible to make a smooth transition from existing legacy technologies to the bright future ahead?

In this whitepaper, our Working Group Cables investigates how new Single Pair Ethernet cables can be used to carry legacy bus protocols (Foundation Fieldbus, Profibus PA and PB, RS485, BacNet, Modbus, Canbus) and to what extent old cables are able to function within future SPE communication networks.

Halo Electronics & UWBX

Immunity from Interference for SPE in Noisy Environments

SPE can be deployed in noisy environments, where capacitive coupling and Common-Mode Choke (CMC) front-end circuits may not offer sufficient CMR to protect the link. Communication drop-outs or complete signal blockage may occur due to interference that is readily found in noisy environments. In this paper we consider the issue with some significant conclusions…

Weidmüller

OMNIMATE® Data Ethernet-APL: Reliably connecting field devices in the process industry

Ethernet-compatible interfaces are increasingly needed to access data from the field via IIoT. For the process industry the new technology Ethernet-APL now allows direct access down to the field and device level via an internationally standardized two-wire solution. With this new whitepaper you learn more about the APL technology, possible solutions and benefits.

Single Pair Ethernet System Alliance

SPE for Field Communication

Written by our experts from alliance member companies such as Weidmüller, Rosenberger, Fischer Connectors, Sick or Draka Comteq, the document provides an overview of today’s possibilities and opportunities of SPE in a variety of application areas.

SPE Industrial Partner Network

Single Pair Ethernet - Testing

This application note examines measurements on SPE cabling and explains why cabling measurements are an important tool for ensuring compliance with standards and the proper functioning of the network, even with SPE cabling.

Single Pair Ethernet System Alliance

Multidrop-SPE-Technologie

The 15-page technical paper was written by members of the Single Pair Ethernet Alliance. It outlines multidrop SPE, providing a comprehensive explanation of the current status of the technology and its use cases.

SPE Industrial Partner Network

Single Pair Ethernet – Cable standards and construction

Single Pair Ethernet is the technology that perfectly meets the industry’s new network technology requirements in the context of Industry 4.0 and IIoT. Central elements of the standard are the Single Pair Ethernet cables. The International Electrotechnical Commission (IEC) has defined and standardized the structure and the high electrical properties in the IEC 61156 series of standards. This application note describes the cable standardization and its design in detail.

SPE Industrial Partner Network

Single Pair Ethernet - Power Supply

The Application Note shows in a practical way how the simultaneous transmission of data and power via SPE infrastructure succeeds. The focus is on concepts such as Power over Data Line and hybrid connectors/cables.

SPE Industrial Partner Network

Single Pair Ethernet - M8 hybrid system

In the hybrid SPE solution, the M8 hybrid connectors and the hybrid cables support a configuration structure consisting of an SPE data pair for data transmission (AWG 22 to AWG 26) combined with a separate power pair (AWG 18) for powering the devices. This application note describes this system in detail with important specifications.

SPE Industrial Partner Network

Single Pair Ethernet – M12 Hybrid System

Hybrid transmission of SPE and power in just one cable and connector is intrinsically important for future IIoT applications. Devices are shrinking, the space for cables and interfaces is decreasing and at the same time the requirements for network connection and power supply are increasing. The hybrid SPE + Power interface M12 hybrid according to IEC 63171-7 is available in seven codings, each serving a specific power level, depending on the application. This makes the interface a useful extension of the functionalities of the M8 hybrid interface defined in IEC 63171-6.

SPE Industrial Partner Network

Single Pair Ethernet - MDI integration

The Application Note shows in a practical way how users succeed in integrating Single Pair Ethernet interfaces and PCB components. Key technical data provide a secure framework for the development of the next generation of industrial devices.

Phoenix Contact

SPE in industrial applications.

Most Industrial Internet of Things (IIoT) trends and innovations aim to harmonize product functions and solution requirements. Read about the features and benefits of SPE in industrial applications.

TE Connectivity

Benefits of a Hybrid Connectivity Solution over PoDL

In the whitepaper we will discuss the capabilities of hybrid connectivity solutions compared to existing powering solutions. For many applications power over data lines (PoDL) might be sufficient. However, hybrid connection solutions have a number of advantages for industrial applications. What you will learn from this whitepaper: – Powering methods with Single Pair Ethernet (SPE) – Comparison of network topologies / power distribution structures – Power transfer with hybrid connectors – discussing M8 interface (standardized in IEC 63171-6) and M12 hybrid interface types (standardized in IEC 63171-7)

HARTING

Single Pair Ethernet - The Infrastructure for IIoT

The whitepaper offers an introduction to SPE. It explains basic concepts, why SPE is perfectly suited for IIoT and which new industry standards are becoming important.

HELU

Single Pair Ethernet

The whitepaper offers an introduction to SPE and answers frequently asked questions about Single Pair Ethernet.

Reichle & De Massari

Single-Pair Ethernet – Ready for the Future.

Read the history of the Single Pair Ethernet. How it works. And why it will make barrier-free communication from the sensor to the cloud with a uniform protocol (IP) possible in the future.

Belden

Single Pair Ethernet for Industrial Applications

Single- pair Ethernet in combination with Time-Sensitive Networking (TSN) and power over data lines enables an end-to-end Ethernet network from the sensor to the cloud usable anywhere space is limited and where the weight of cables and components plays a major role.

Rosenberger

Technology Transfer from the Automotive World to Industry

With the RoSPE connector series, Rosenberger has succeeded in developing a space-saving, lightweight and robust industrial connector system that meets the applicable mechanical and environmental requirements.